TG-51 Calibration  scanner


​NEW

Scan step size ¼ mm with user selectable scanning/positioning  speed of up to 4.5 mm/sec.
 
Scanning positioning accuracy: .0125 mm
Manual positioning accuracy: +/- .005 mm
Reproducibility: +/- .0015 mm
Standard maximum scanning volume with 355 mm scanning arm: 377(L) x 200(W) x 160(D)mm
Water Tank 10mm clear acrylic with reinforced corners.
 

The CRS 3D scanner consists of our proven 2D scanner combined with our rotating table top lift table.  The rotating table top provides the third axis.  The scanning angle is simply set by manually turning the table to the desired angle and entering the angle in the software,  the 2D scanner does the rest.  By eliminating the Y axis arms,  weight is reduced,  less chance of mechanical errors and setup time is much faster.  When your scanning is finished the lift table makes for a great storage cart with wheels.  NOTE Already have a 2D scanner?,  add this lift table to your 2D and convert it to a 3D.

Scan step size ¼ mm with user selectable scanning speed of up to 400 points/sec.
Scanning positioning accuracy: ¼ mm
Manual positioning accuracy: +/- .1mm
Reproducibility: +/- .03mm
Scanning volume: 520(L) x 400(D)mm (20.5 x 15.8 inches)
Weight of scanner mechanism: 3.4kg (7.5 lb)
 
Water Tank 10mm clear acrylic with reinforced corners.
Empty weight: 14.5kg (32 lb)
Inside dimensions: 584(L) x 489(W) x 470(D)mm

(23 x 19.3 x 18.5 inches)
 
Tank filled with water to 16”
Volume 128 liter (34 gallons)

Weight....46kg  (322 b)

HD Proton scanner.

     2D scanner

 Rotating Lift Table

 Electrometer-       Control box


Angle adjustment: Large protractor and pointer

Base: 66cm x71cm  (26"x28")

Table: 45.7cmx45.7cm  (18"x18")
Casters: Four 4” wheels for transport 
The leveling jacks adds up to 2” in height if needed

3D scanner requires our 2D scanner and rotating lift table

Please see below

3D scanner 

Scan step size ¼ mm with user selectable scanning speed of up to 400 points/sec.
Scanning positioning accuracy: ¼ mm
Manual positioning accuracy: +/- .1mm
Reproducibility: +/- .03mm
Measured hysteresis: .5 mm
Maximum scanning volume, photons: 520(L) x 285(W) x 200(D)mm (20.5 x 11.2 x 7.9 inches)
with special holder for IBA chamber.
Weight of scanner mechanism: 5kg (11 lb)
 
Water Tank .375” clear acrylic with reinforced corners.
Empty weight: 7kg (15.5 lb)
Inside dimensions: 584(L) x 335(W) x 265(D)mm (23 x 13.2 x 10.4 inches)
Tank filled with water to 9.5”
Volume 47 liter (12.5 gallons) Weight 59kg (130 lb)

Scan step size ¼ mm with user selectable scanning speed of up to 400 points/sec.
 
Scanning positioning accuracy: ¼ mm
Manual positioning accuracy: +/- .1mm
Reproducibility: +/- .03mm
Standard maximum scanning volume with 34cm scanning arm: 310(L) x 200(W) x 200(D)mm
Water Tank 10mm clear acrylic with reinforced corners.
 
Other tank sizes available on request.

Tomo scanner

Scanning positioning accuracy: ¼ mm
Manual positioning accuracy: +/- .1mm
Reproducibility: +/- .03mm
Scanning volume: 285(L) x 215(D)mm (11 x 8.5 inches)
Weight of scanner mechanism: 2.8kg (6 lb)
 
Water Tank 10mm clear acrylic with reinforced corners.
Empty weight: 6kg (13 lb)
Inside dimensions: 330(L) x 330(W) x 300(D)mm (13 x 13 x 12 inches)
Tank filled with water to 11”  
Volume 30 liter (8 gallons): Weight 38kg (84 lb)

Freestanding calibrate-able electrometer/control unit is compatible with all scanner components.
Connects to a PC computer LAN 10/100 using Windows XP, Win7, Win8, Win10.
Analog bipolar inputs with linearity of .1% over full range. Fixed gain for constant frequency response.
Dual channel, input current rate mode. Sensitivity .04pA to 1.3nA.
Three 16 bit 3 microsecond analog to digital converters used as primary, reference and bias  voltage.
Bias voltage software selectable +/-150V or +/-300V.
Three independent stepper motor drivers controlled by software.
External power supply, 90-240V, 50/60Hz. Power consumption <20W.
Size: 193 x 114 x 38mm (7.6 x 4.5 x 1.5 inches). Weight: 1kg (2.3lb) plus .7kg (1.4lb) external power power supply. 

​NEW features includes, precision lead screw drive with .0125 mm/step accuracy,  manual hand control positioning,  built in carrying handles for easy moving, NEW built in drain valve for convenient emptying, integrated motor connector and it only weighs 18 lbs empty for FAST setups.

​Proton scanner

Lift capacity: 226kg (400 Lbs)
Minimum height: 67.9cm (26.75”)
Maximum height: 100.3cm (39.5”)
Weight of table: 41.85kg (105 Lbs)
Lift mechanism: Air-column,  electric over air, controlled by hand held wand
Leveling: Three point hand-operated jacks

SiteLock